Handling And Use; Starting/Stopping Steaming - Lupilu LBNZ 500 A1 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 108
Place the food onto the steamer grill
steamer insert
NOTE
Do not overfill the steamer insert
covering all the holes in the steamer grill
between the pieces and through the holes in the steamer grill
Place the lid
points to the
lid
the container handle
Place the container
at the bottom of the container
base
the container points to
container

handling and use

Starting/stopping steaming

Turn the function selector
lights up red . The appliance now heats up the water in the container
brings it to the boil . The steam created rises into the steamer insert
cooks the food on the steamer grill
For cooking times, please refer to the guide values that we have provided
in the section recommended cooking times .
After the cooking time is complete, turn the function selector
0 position to switch off the appliance .
Without a manual switch-off, the appliance will stop steam cooking
automatically after around 30 minutes and there will be a beep .
WARNING – RISk Of INjURy!
The steam escaping from the steam outlets on the lid
the container
during steaming!
Never open the lid
contact with escaping steam and hot water on the inside of the container
Do not open the lid
steam is coming from the steam outlets on the lid
Turn the function selector
32 
GB │ IE
to above the upper edge .
onto the container
marking at the top of the container handle
clockwise so that the
and the lid
onto the appliance base
. Then turn the container
the
clicks into place .
are hot . Avoid contact with this steam and the container
before the end of the cooking process to prevent
until the water has stopped boiling and no more
. Ensure that you do not fill the
by packing the food too tightly or
. The steam must be able to flow
so that the
symbol points to the
clicks into place .
so that the
points to the
symbol on the appliance
clockwise so that the
symbol on the appliance base
to the
position . The function indicator
.
to the 0 position .
.
symbol on the lid
. Then turn the
marking at the top of
marking
marking
on
and the
and
and
to the
and the surface of
.
LBNZ 500 A1
.

Publicidad

Tabla de contenido
loading

Productos relacionados para Lupilu LBNZ 500 A1

Tabla de contenido