Removal/Fitting The Mixer Unit - Lupilu LBNZ 500 A1 Instrucciones De Uso

♦
Clean the mixer unit
removal/fitting the mixer unit with washing-up liquid and then rinse
it in clear running water .
♦
Ensure that there is no detergent residue on or in the appliance before using
it again .
♦

Removal/fitting the mixer unit

In order to clean the mixer unit
move it from the container
♦
Pull the container
(B) turn it clockwise – as viewed from below –
until the mixer unit
♦
Put your hand into the container
carefully remove the mixer unit
container
► The blades in the mixer unit
not touch the blades with your bare hands .
♦
After cleaning, replace the mixer unit
from above (as shown) into the container
and guide the blade drive (B) through the
opening in the bottom of the container .
♦
Turn over the container
drive (B) from below and turn it anticlockwise
– as viewed from below – as far as the stop .
LBNZ 500 A1
The container
dishwasher safe .
up, grip the blade drive
comes free .
.
WARNING – RISk Of INjURy!
after you have removed it as described in section
, lid , steamer insert
, you must re-
as described above .
and
from the
are very sharp! To avoid cutting injuries, do
, grip the blade
and steamer grill are
B
B
B
GB │ IE │ 35 ■