Technical Data; Charging Mode - Beta 1838SLIM Instrucciones

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO

TECHNICAL DATA

INTERNAL LIGHT
EXTERNAL LIGHT
TOP LIGHT
BATTERY SPECIFICATIONS
POWER SUPPLY VOLTAGE
CHARGE INPUT
PROTECTION DEGREE
OPERATING TEMPERATURE

CHARGING MODE

To charge the lamp, open the USB socket on the ON/OFF switch.
that the mains voltage is compatible with that of the charger as stated in the TECHNICAL DATA table.
While the lamp is being charged, the LED on the USB socket will be blinking. The lamp will be fully
charged when the LED remains on; the lamp can then be disconnected from the power supply and the
USB socket guard closed.
Charge level
USE
• Press the ON/OFF switch to enable the lamp.
• Press once to enable the TOP light.
• Press a second time to enable the INTERNAL light in the eco mode.
• Press a third time to switch the lamp to the full power mode.
• Press a fourth time to enable the EXTERNAL light.
After the lamp has been on for 5 seconds in the selected mode, pressing the ON/OFF switch will cause
it to be SWITCHED OFF. When the lamp is enabled again by pressing the ON/OFF switch, it will go on
in the last selected mode.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only.
For such jobs, you can contact Beta Utensili S.P.A.'s repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be
collected separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the
product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents dama-
ge to the environment and human health.
6
COB LED
eco mode ~ 100 lm - max 4h
full power mode ~ 200 lm - max 2h
COB LED ~ 180 lm full power mode - max 2h
SMD LED ~ 80 lm - max 3h
Li-Ion 3.7 V, 700mAh, 2.59 Wh
100 - 240V ~ 50/60Hz
DC 5V -1A (USB-C)
IP54, IK 07
-10°C ÷ +40°C
EN I