Power Connection - König Electronic HAV-CR70 Manual De Uso

OPERATION INSTRUCTIONS
1. LCD display
2. Band (FM/AM) switch
3. Volume up control
4. Volume down control
5. AC cord
6. Battery compartment
7. FM antenna wire
8. Tuning control
9. Alarm 2 set button
10. Alarm 1 set button
11. Dial scale and pointer
12. Time set button
13. Alarm 1 / alarm 2 /
alarm 1 + 2 select button
14. Power ON/OFF alarm
OFF button
15. Audio in Jack
16. Snooze / sleep button
17. Reset button
18. Unit bracket
19. Rating label (affi xed on the back of unit)

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. Then press the reset button (17) with
a ballpoint pen. This unit is equipped with a battery back up system, it requires a 3 V fl at lithium
battery. Insert the battery in the battery compartment, making certain that the positive and
negative (+ and -) battery terminals are attached to the corresponding terminals on the plate in
the battery compartment.
NOTE: If an AC power failure occurs, the clock automatically switches to the battery power
supply and the clock and time memory continue running. When the AC power resumes, the
clock switches back to AC again.
ESD remark: In case of malfunction due to electrostatic discharge just reset the product
(reconnect of power source may be required) to resume normal operation.
ENGLISH
2