Kong 930.000 ANA Guia De Inicio Rapido

8 - SPECIFIC INFORMATION
Category III Personal Protective Equipment 930.000 "ANA", in the
versions 930.280 "ANA 28" and 930.460
"ANA 46" are:
- rigging rings suitable for creating prevention and fall arrest systems
(restrain, work positioning, rope access systems, etc.);
- parts of a system for protection against impact arising from falling
from heights;
- certified in compliance with RfU CNB/P/11.114.
Fig. 1 – Use as rigging ring.
Fig. 2 – Force composition – Keep in mind force composition and
verify that the maximum load applied to the device is less than 25 kN.
Fig. 3 – Example of wrong and dangerous use - The device must
always be free to position itself.
Check before and after use – Before and after use, make sure that
the device is in an efficient condition and that it is working properly, in
particular, check that:
- It has not been mechanically deformed;
- It shows no sign of cracks, wear, corrosion, and oxidation;
- Markings are legible.
Important:
- This device works better along the major axis;
- When you use this device as part of a fall-arresting system, you must
use suitable equipment (like energy absorbers) to reduce impact
forces which may be created when a fall is arrested;
- Carefully assess the suitability of the structure and of the anchoring
point, in relation to the load transmitted by the device during use and
the corresponding direction of application.
Warning, the devices inserted in the connection eyelets (C):
- must not get into contact with each other;
- must be free to move and to position themselves in the foreseeable
direction of load application.
ANA
930.000 ANA
Master text
NOMENCLATURE • NOMENCLATURA
930.280 930.460
ANA 28 ANA 46
A
B
EN: (A) Connection hole, (B) Body in aluminium alloy.
IT: (A) Foro di collegamento, (B) Corpo in lega di alluminio.
FR : (A) Trou de raccordement, (B) Corps en alliage d'aluminium
DE: (A) Verbindungsöffnung, (B) Gehäuse aus Aluminiumlegierung.
ES: (A) Agujero de conexión, (B) Cuerpo en aleación de aluminio.
NOMENCLATURE • TERMINOLOGIE • NOMBRES
1
2
MAX 25 kN
TEXTILE FRIENDLY!
3