Vimar ELVOX TAB Instrucciones Usuario página 8

Operation
Answering a call
A call from the outdoor entrance panel or from
an intercommunicating device can be answered
during the chime cycle or once it has ended. To
answer, lift the handset; to end the call, replace
the handset.
FP/M Landing calls (see "FP/M con-
nection variant" wiring diagrams)
The duration of the chime cycle depends on
how long the button is pressed, for a maximum
time of 10s.
Making an intercommunicating call
Raise the handset and press the programmed
button for the indoor unit to call. During the call,
the indoor unit emits a tone in order to signal
that the call is being made. If the indoor unit is
already engaged with another call, a tone will
be heard on the indoor unit making the call to
indicate that the user receiving the call is busy.
When the called party answers, the communi-
cation is automatically activated. Hang up to
end the conversation. The maximum length of a
conversation is 5 minutes (unless programmed
otherwise).
Temporarily muting the chime (Mute)
When you receive a call, you can temporarily
mute the chime by pressing the
Lock command
In standby mode (handset hung up) or during a
conversation, pressing the
the unlocking command (by default the last call-
ing entrance panel).
Self-start with dedicated button (but-
ton )
To self-start to the master panel, briefly press
the button. To stop the communication, lift
8
the handset. Replace the handset to end the
conversation.
Calling the concierge switchboard
To make a call to the concierge switchboard (if
installed in the system), raise the handset and
send the call by pressing the
Audio frequency function for hearing
aids
Art. 7549 can be used by people wearing hear-
ing aids.
However, for correct operation of the hearing
aid refer to its instruction manual. Any metal
objects or electronic equipment nearby may
compromise the quality of the sound received
by the hearing aid.
Adjustments (during a conver-
sation)
Brightness adjustment (10 levels with
indoor unit in a conversation)
Adjustment is possible during communications
and self-starting, press the
(underneath the handset) to adjust the bright-
ness.
External call voice unit volume adjust-
ment (10 levels with indoor unit in a
conversation)
button.
Use the
handset) to adjust the desired level. A beep is
emitted on reaching the maximum or minimum
button sends
level.
It is adjusted during a conversation.
Internal call voice unit volume adjust-
ment (10 levels with indoor unit in a
conversation)
Use the
button.
and
and buttons (underneath the
and buttons (underneath the
buttons
EN