Getting Started; Connecting The Projector - Acer C110 Serie Manual Del Usuario

6

Getting Started

Connecting the Projector

Connect the USB connector to your computer and plug the USB connector to the projector. If you want a brighter display, plug two USB connector to
your computer.
Note: It is recommended that you should plug the two USB connectors on the same side of the computer to get the best performance.
Please make sure that your computer is capable of supplying sufficient current through the USB ports.
Note: If only one USB port is available, use the Master USB connector.
Minimun System Requirements:
•
Pentium M 2 GHz
•
1GB DDR SDRAM
•
40 GB free HDD space
Note: Video playback is not recommended when using netbook or CULV notebook (CPU power limitation).
Note: Dual-core notebook or above is recommended if you want a smooth video playback.
Note: USB bandwidth is depended on USB 2.0 specification.
Supported OS:
•
Windows XP Home or Professional 32-bit with Service Pack 3 or later
•
Windows Vista 32- and 64-bit with Service Pack 2 or later
•
Windows 7 32- and 64-bit
Note: Mac OS and Android OS are not supported. Windows 7 Starter edition does not support Extended Display.
Note: Make sure Auto Run function is enabled. If not, please enable manually.