Installation - Glacier bay F51A1071CP Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION : Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply.
Clean off the installation surface.
Place the faucet (A) through the mounting-
holes in the sink.
Secure the faucet (A) to the sink using the
mounting nuts (C) provided .
NOTE: If the sink is uneven, use silicone under the
putty plate.
2
Connecting the water supply
lines
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
Use wrenches to tighten the connections. Do
not overtighten.
A
C
4
1
3
2