Connecting To The Network - Ezviz X3 Manual Del Usuario

Operations
Step 1
Starting up the X3
1

Connecting to the Network

Connect X3 to the router with a network cable.
The X3 does not support the Wi-Fi network connection.
2
Power-on
Connect the X3 to the power adapter with a power cable, and
connect to the power socket. The LED indicator turns solid blue
when the X3 starts completely.
The indicator turns solid yellow in the following cases:
- No installed HDD
- HDD error
- Device exceptions
Network Cable
6
WPS/
WAN LAN1 LAN2 LAN3 LAN4
POWER
RESET