Ezviz X3 Manual Del Usuario página 11

Step 2
Adding Devices to EZVIZ
1
Installing the EZVIZ App
- Download and install the EZVIZ app by searching the "EZVIZ" in
App Store or Google Play
- Launch the app and register for an EZVIZ user account.
2
Adding X3 to EZVIZ
- Log into the EZVIZ app.
- Click the "+" on the upper-right hand corner to add a device.
- Scan the QR Code on the bottom of X3.
Network Video Recorder
Model: XXXXXX
IP: XXX
SN: XXXXXXX
MM/YYYY
Verification Code: XXXXXX
3
Adding Network Camera to EZVIZ
The procedure of adding a network camera is the same as the
adding X3. Refer to the step 2 to add a network camera to your
EZVIZ account.
Step 3
Completing Configuration
After adding the X3 and cameras to your EZVIZ account, go to the
storage status of camera and enable the X3 recording. X3 will start
the 7*24-hours continuous recording of cameras.
The X3 supports up to 8 cameras recording.
.
TM
Adding by Scanning QR Code
7