Beta 1461/C27G Manual De Instrucciones página 4

INSTRUCTIONS FOR USE
COMPREHENSIVE TIMING TOOL KIT FOR BMW 2.0, MINI 1.6 - 2.0
DIESEL ENGINES
APPLICATION
Brand
X1 2.0 (E84); X3 2.0 (E83, F25); Serie 1 2.0
BMW
(E81/82/87/88, F20); Series 3 2.0 (E90/91/92/93);
Series 5 2.0 (E60/61, F10/11)
Mini 1.6 e 2.0 (R56/57); Clubman 1.6 e 2.0 (R55);
MINI
Countryman 1.6 e 2.0 (R60); Coupe 2.0(R58)
Engine
BMW 2.0D N47
MINI 2.0D – 1.6D N47
PARTS:
Beta code
VN 126
11 6 480
VN 125 11 5 320
VN 123 11 8 760
11 3 340
VN 119
VN 124 11 8 740
Special precautions - Read carefully
• Disconnect the battery earth leads (check the radio code, if available)
• Remove the spark or glow plugs to make the engine turn easier
• Do not use any cleaning fluids on belts, pinions or tensioners
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise, unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening the crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand, and to re-check the crankshaft and camshaft
timing positions
• Camshafts and crankshafts may only be turned with the chain/belt drive mechanism fully installed.
• Do not turn the crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the manufacturer's service manual or the supplied instruction book
• Incorrect or out of phase engine timing results in damage to the valves
4
Model
11 6 480
●
●
OEM code Description
BMW crankshaft rotation socket
Complete flywheel locking pin
Exhaust camshaft timing plate N47/N47S
Pin Ø 4x120 for locking intake camshaft gear (2 pcs)
Injection pump pinion removal tool
Engine
N47
e
N47S
OEM Code
11 5 320 11 8 760
● ●
● ●
Engine code
N47D20A, N47D20C, N47D20D, N47D20O,
N47D20U, N47SD20B, N47SD20D,
N47TD20K, N47TD20O, N47TD20U
N47C16K, N47C16, N47C20K,
N47C20U
11 3 340
●
●
EN
11 8 740
●