Technical Specifications; Charging Mode - Fulbat Fulload 1000 Manual De Usuario

be used as a general guide only: some batteries maybe able
to handle a higher charge current. Check with the battery
manufacturer when charging batteries with small capacity.
Charge current
Battery capacity charging
Battery capacity maintaining
ENVIRONMENTAL CHARACTERISTICS
Operating Temperature: 0 to 45°C.
• Storage Temperature: -25 to 85°C.
• Operating Humidity Range: 0 to 90% RH.
• Cooling: passive / natural.

TECHNICAL SPECIFICATIONS

Part number
Type
Approvals
Input voltage range
Input frequency
Max output voltage
Charging current
Housing material
Size (LxWxH) in mm
Weight in Kg
Ingress protection

CHARGING MODE

The Fulload 1000 has 4 charging modes as indicated in the table
below. Some charging modes must restart the charger and re-
connect the battery.
Use the mode button to switch the mode to change the battery
type. Before choosing, first understand the differences between
FULBAT - www.fulbat.com
1A (6V/12V)
3-20Ah
All battery sizes
Fulload 1000
Automatic - 3 stages
CE
220V-240Vac
50Hz
Various
1A(6V/12V)
ABS
118x70x62
0.182Kg
IP60
each rechargeable battery mode.
Do not operate the charger before confirming whether the batte-
ry charging mode is suitable.
Mode
In standby mode, the charger does not
charge or power the battery. In this mode,
Standby the energy saving function is activated,
and standby power is obtained from the
power outlet.
12V Normal Used for 12V lead-acid batteries (WET, MF,
Charging Voltage: DRY, Ca/Ca and FLOODED). When selected,
14.4V (1A) the white LED will light up.
Used to charge 12V AGM, SLA and GEL
12V AGM
batteries or to charge 12V batteries in
Charging Voltage:
winter mode. When selected, the white LED
14.8V (1A)
will light up.
6V Normal
Used to charge 6V lead-acid battery, white
Charging Voltage:
LED will light up when selected.
7.2V (1A)
12V Lithium
Used to charge 12V lithium battery, white
Charging Voltage:
LED will light up when selected.
14.2V (1A)
To select the 6V mode, you must press and hold the mode button
for 3 seconds.
3
Explanation