Tool Specifi Cations; Symbols; Controls; Area Of Use - Protool DCC-AGP 125 Manual Del Usuario

Exhaust Cover DCC-AGP 125
- original instruction
Table of contents
1 Tool Specifi cations ...................... 13
2 Symbols ................................... 13
3 Controls .................................... 13
4 Area of use ............................... 13
4.1 Description of the exhaust cover ... 13
4.2 Use .......................................... 14
5 Safety instructions ..................... 14
6 Assembly .................................. 15
6.1 Exhaust cover ............................ 15
6.2 Additional handle ....................... 15
7 Clamping the diamond cutting
disc .......................................... 15
8 Dust exhaust ............................. 16
9 Commencement of operation ....... 16
9.1 End of operation ........................ 16
9.2 Aperture cover ........................... 16
10 Guide system PROTOOL .............. 16
11 Maintenance .............................. 16
12 Environmental Protection /
Disposal.................................... 17
13 Warranty .................................. 17
14 Declaration of Conformity ............ 17
1

Tool Specifi cations

Tool
Disc thickness
with a bar
without a bar
Peripheral velocity
Cut depth
(without a guide bar)
Exhaust hose
Weight
To be used with
machines
GB
125 mm
max. 3 mm
max. 6.5 mm
80 m.s
27 mm
27/36 mm
2.2 kg
AGP 125-14 D
AGP 125-14 DE
2

Symbols

Warning of general danger
Use protective goggles!
Read the instructions
Not to be included in municipal refuse
Advice or tip
►
3

Controls

[1-1] Arresting button
[1-2] Suction adapter
[1-3] Aperture cover
[1-4] Hexagonal wrench
[1-5] Sliding stop for cut depth
[1-6] Stop screw
[1-7] Cut depth scale
[1-8] Catch arrest
[1-9] Sleeve
[1-10] Guiding tabs
[1-11] Clamping screw
[1-12] Bar guide
[1-13] Threading for clamping and addi-
tional handle
[1-14] Cut indicator
[1-15] Screw for setting bar clearance
[2-1] Angle grinder
[2-2] Additional handle (included with
the cover)
[2-3] Clamping neck
[2-4] Exhaust cover
[2-5] Bottom fl ange (included with the
angle grinder)
[2-6] Cutting disc
-1
[2-7] Clamping nut (included with the
cover)
[2-8] Wrench (included with the cover)
[3-1] Guide bar
Not all of the accessories illustrated or de-
scribed are included as standard delivery.
4

Area of use

4.1 Description of the exhaust
cover
The exhaust cover is additional equipment
for angle grinders, to be used for safer
13