Cleaning And Maintenance - Princess 220101 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Turn the release lever (4) clockwise and tilt
the mixer head (1) upwards until it locks
into place.
Mount the required accessory (6/7/8).
Turn the release lever (4) clockwise and tilt
the mixer head (1) downwards until it locks
into place.
Make sure that the accessory (6/7/8) is
located in the ingredients.
Insert the mains plug into the wall socket.
Switch on the appliance.
Set the mixing speed.
Refer to the section "Switching on and off".
After use, switch off the appliance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.

Cleaning and maintenance

The appliance must be cleaned after each
use.
Warning!
-
Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until the
appliance has cooled down.
-
Do not immerse the appliance in water or
other liquids.
Caution!
-
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
-
Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible
damage.
Clean the housing with a soft, damp cloth.
Clean the mixing bowl in soapy water.
Clean the whisk, the dough hook and the
A-beater in soapy water.
Rinse the accessories under running water.
Thoroughly dry the accessories.
After cleaning, put the appliance in the
original packaging.
Store the appliance in a dry and frost-free
place, out of the reach of children.
Disclaimer
Subject to change; specifications can be
changed without further notice.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido