Levels Of Emission And Immunity Attended; Installation Conformity - WEG SCA-05 Manual De Instrucciones

1.2 Levels of Emission and Immunity Attended

Drive Model
SCA050004T2223
(118.11in)
SCA050008T2223
SCA050024T2223
(236.22in)

1.3 Installation Conformity

For installation conformity, use:
1. Servodrives manufactured from November 2007, with Hardware revision equal to or higher
than R12. The Hardware revision is found on the identification label of the SCA-05. For
further details regarding the label see chapter 2, item 2.4 of the SCA-05 Manual.
2. Filters suitable to the SCA-05 model, according to the following table:
WEG Stock Item
0208.2126
0208.2127
0208.2130
0304.1223
3. Output cables (motor and realigning cables) shielded according to the following:
Table 4 – Cables available for each servodrive model
WEG Item
0307.8355
0307.8356
0307.8357
0307.8358
0307.8359
Table 2 – Maximum cable lengths for each category
Conducted Emission
Category Category
C1 C2
Class B Class A1
3m
15m
(590.55in)
6m
Table 3 –Filters for each servodrive model
RFI Input Filter
B84143-A8-R105
B84143-A16-R105
B84143-A50-R105
B64290-S8615-X5 (Choke)
Resolver Cable
Narrative
SFC1-03m
SFC1-06m
SFC1-09m Resolver Cable
SFC1-12m
SFC1-15m
Radiated Emission
Category Category
C3 C1
Class A2 Class B
15m Does not
(590.55in) attend
Description Length
03m (118.11in)
06m (236.22in)
09m (354.33in)
12m (472.44in)
15m (590.55in)
Category Category
C2 C3
Class A1 Class A2
3m 3m
(118.11in) (118.11in)
Servodrive Model
SCA-05 4/8
SCA-05 4/8 MF
SCA-05 5/8 MF
SCA-05 8/16
SCA-05 24/48
SCA-05
All
7