ASROCK Fatal1ty FM2A88X+ Killer Serie Manual Del Usuario página 26

2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA3_1_2: see p.1, No. 10)
(SATA3_3_4: see p.1, No. 11)
(SATA3_5_6: see p.1, No. 12)
(SATA3_7_8: see p.1, No. 13)
USB 2.0 Headers
(9-pin USB_5_6)
(see p.1 No. 22)
(9-pin USB_7_8)
(see p.1 No. 21)
(9-pin USB_9_10)
(see p.1 No. 20)
USB 3.0 Header
(19-pin USB3_5_6)
(see p.1 No. 8)
22
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
USB_PWR
P-
P+
GND
1
GND
P+
P-
USB_PWR
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
These eight Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides four default USB 2.0
ports on the I/O panel, there
DUMMY
are three USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.
Besides four default USB 3.0
Vbus Vbus
ports on the I/O panel, there is
IntA_PB_SSRX-
IntA_PB_SSRX+
one USB 3.0 header on this
GND
IntA_PB_SSTX-
motherboard. This USB 3.0
IntA_PB_SSTX+
header can support two USB 3.0
GND
IntA_PB_D-
ports.
IntA_PB_D+
Dummy
1