Using The Air Purifier; Understanding The Air Quality Light; Turning On And Off; Changing The Fan Speed - Philips AC1214 Manual Del Usuario

4 Using the air
purifier
Understanding the air
quality light
Indoor Allergen Index (IAI) is a
real-time numerical display that provides
visual and immediate feedback on
indoor allergen level.
IAI Air quality
light color
1-3 Blue
4-6 Blue-Purple
7-9 Purple-Red
10-12 Red
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.

Turning on and off

Note
• Always place the air purifier on a
stable, horizontal, and level surface
with the front of the unit facing away
from walls or furniture.
• For optimum purification performance,
close doors and windows.
• Keep curtains away from the air inlet or
air outlet.
1
2
Air quality
3
level
Good
Fair
Poor
• If the air purifier stays connected to
Very poor
• If the air purifier accidentally shuts off

Changing the fan speed

There are several fan speeds available.
You can choose the auto mode, speed
1, 2, 3 or turbo mode (t).
Auto (A)
•
Put the plug of the air purifier in the
power socket.
Touch to switch on the air purifier
(Fig.j).
» The air purifier beeps.
» The air purifier operates under
the auto mode by default.
» When the air purifier is warming
up, " " displays on the screen.
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
Touch and hold for 3 seconds to
switch off the air purifier.
Note
the electrical outlet after turning OFF,
the air purifier will operate under the
previous settings when turned ON
again.
during running, it restarts automatically
and operates under previous settings
when the power supply is resumed.
Touch the fan speed button
repeatedly to select the auto mode
(Fig.k).
EN 7