Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1
EN
3
Items Supplied
Inspect the product for shipment damage and ensure that
all items have been received:
•
Correct product (without battery pack)
•
Instruction manual
•
Declaration of conformity
•
Warranty
4
Transport / Storage
Transport or store in the original packaging. Disconnect the
power supply during storage. The packaging is recyclable.
Refer to the 9 Ambient conditions, page 12.
5
Product Description
Battery powered hand held nutrunner used for the tighten-
ing / loosening of threaded fasteners:
•
Work Light for secondary okay/not okay visual feed-
back
•
"Stay Alive" function prevents reboot during battery
pack change. Stay alive time = 20 sec.
•
On-tool Digital Transducer and Servo provide critical
information and eliminate errors
•
Connects easily over WLAN and Bluetooth 4.0.
Index
Description
1
Display
2
Function Keys
3
Output Drive
10
Index
Description
4
Work Light
5
LED showing OK or NOK
6
Reverse switch
7
Start Trigger
8
Battery pack
9
SD card
10
Micro USB-B Port
11
Socket + u-Guard (optional accessory)
Display/Run Screen
Default Settings:
White
Tool running
LED Work Light
Default Settings:
Blue
Tool running
LED
LEDs
Continuous
green light
Continuous
red light
Flashing light
Green –
low frequency
Off
If linking is selected on the controller:
Green flash-
ing light –
high frequency
Flashing red
light
6
Before Initial Operation
Charge Battery Pack
Battery pack is supplied partly charged and must be
charged completely being used for the first time.
See Original Instructions Milwaukee charger.
Do not use any other battery packs / chargers than the
following:
Battery Pack 18 V
Order no.
T50-1000497
T50-1000498
P2543BA | 2021-01
Green
Red
OK rundown
NOK rundown
Green
Red
OK rundown
NOK rundown
Operating status
Result
after fastening
cycle
Active
OK
Active
NOK
Energy saver
mode
Sleep
Active/Setting:
Linking OK
Linking
Active/Setting:
Linking NOK
Linking
Capacity
2,0Ah
5,0Ah
Apex Tool Group
Publicidad
Tabla de contenido
