System Connections - Sharp DK-AP7N Manual De Manejo

DK-AP7N(R)
DK-AP7N(S)

System connections

DK-AP7N(W)
ENGLISH
Make sure to unplug the AC/DC adaptor before making
any connections.
■ Connecting iPod to TV
Photo and video files from iPod can be viewed by connecting the
system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket at the back of the unit and set the TV Out on the iPod unit
to "ON" position.
V D I E O O U
■ Watching videos on a TV connected to iPod
1
Enter the iPod menu.
Press the E
LED blinks twice to display video on the TV screen.
2
Select the desired video from the iPod unit.
3
Press the
playback.
For iPod touch, playback will automatically start once the
desired video is selected.
Notes:
●
If the TV Out setting is already turned ON at video menu, the
video is automatically displayed on the TV screen when iPod
starts playback.
●
To return to watching video on iPod screen, repeat steps 1 to 3.
●
During iPod video playback, pressing the E
button until the E
out display between iPod and TV.
E-5
T
Video cable
(not supplied)
To video
input socket
(-TV OUT) button until the E
SOUND
button on the iPod unit to start
LED blinks twice will not toggle video
SOUND
●
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple's home page for
further information.
●
Customer should also refer iPod operation manual before
making video out setting.
■ Using with the AC/DC adaptor
1
Plug the AC/DC adaptor cable into the DC IN socket on
the unit.
2
Plug the AC/DC adaptor into a wall socket.
TV
SOUND
Notes:
●
Unplug the AC/DC adaptor from the wall socket if the unit will
not be used for a prolonged period of time.
●
Connecting the AC/DC adaptor to the unit disconnects the
batteries.
●
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
(-TV OUT)
SOUND
1
AC/DC Adaptor Cable
DC IN socket
(DC 6V)
2
Wall Socket
(AC 100 - 240 V, 50/60 Hz)