Costco RC3218 Instrucciones De Ensamble Y Cuidado página 26

4. When this step completed, secure the rear burner
cover to rear panel of the burner box with screws you
removed.
Change to 10 ft. NG hose
Take the regulator off from the manifold and replace it with 10-ft. natural gas hose. Please make sure the
hose is securely fastened. (Fig. 15)
Adjust valve control screw
Pull all the knobs off of valve stems.
For main burners and side burner, adjust the screw in the valve
hole using the flathead screwdriver. Turn screws two complete
turns counter clockwise. (Fig. 16)
For rotisserie burner, adjust the screw in the valve using the
flathead screwdriver. Turn screw two complete turns counter
clockwise. (Fig. 17)
To complete conversion, re-install all knobs, return heat
diffusers to firebox, followed by the grates and warming
rack.
Valve hole
26
Fig. 15
Fig. 16
Fig. 17