Bestop 56872 Instrucciones Para La Instalación página 14

Section 7 Attach Door Rails
Step 1
Remove
Step 1
Remove the bolts from the vehicle (two
from each side) and hold onto it. These
bolts will be reused later in the installation.
Note:
Remember the place where the
fasteners were removed from.
P14 - 56872 Rev. G 0621
Hardware
Front Door Rail Left Front Door Rail Right
Part #599.17 Part #599.16
Qty. 1 Qty. 1
Spacer, 5.5MM
Part #603.20
Qty 2
Torx Driver
Installation Instructions - Trektop for Bronco 2 Door
Step 2
Tools
T50
Step 2
Attach Front Door Rails to the vehicle using the
bolts that were removed from section 2 and one
(1) 5.5 mm spacers (Part # 603.20).
Repeat this step on the left side of the vehicle.
Page 14
© 2021 Bestop, Inc.