Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section 11
Install Belt Retainers
Step 1
Step 1
Attach the Belt Retainer Right (Part #
597.80) to the vehicle body using two (2)
M8 x 24 mm Screws that were removed
when the Hard Top was removed and one
(1) M6 x 15mm screw
(Part #533.61).
Repeat this step on the left side of the
vehicle.
P18 - 56872 Rev. G 0621
Belt Retainer Right
Part #597.80
Qty. 1
Installation Instructions - Trektop for Bronco 2 Door
Hardware
Belt Retainer Left
Part #597.81
Qty. 1
SCREW, M6 X 1.0 X 15.0
Part #533.61
Qty. 2
Page 18
Tools
T30
Torx Driver
© 2021 Bestop, Inc.
Publicidad
Tabla de contenido
