SteelSeries RIVAL 600 Manual Del Usuario página 4

CONFIGURING WEIGHT SYSTEM
01
02
03
find help at support.steelseries.com
Remove the side panels to access the
05
weight molds
Choose your desired weights and insert
12
them into the dedicated molds
10
Re-attach side panels once the desired
05
weight is calibrated. If you find it not to
your liking, repeat steps 01 to 03
CALIBRATION OF LIFT OFF SENSOR
Your Rival 600 is equipped with a secondary,
high precision lift off sensor. To ensure the
highest level of accuracy, the lift off sensor
must be calibrated to your gaming surface of
choice.
By default your Rival 600 is set to a ~0.5 mm
lift off distance. SteelSeries Engine offers the
ability to further tweak the lift off distance.
Calibration of the lift off sensor can happen in
two ways:
Automatic Manual
On every mouse power up (for instance, If you change gaming surfaces it is
plugging in the USB cable), your lift off sensor recommended to recalibrate the lift off sensor.
will automatically calibrate.
To manually calibrate the lift off sensor, hold
down the CPI button
recalibration. Your Rival 600 will flash white
three times when lift off calibration is complete.
find help at support.steelseries.com
2s
for two seconds to force
04