Style selections 2165WWMV Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
6. Place the large end cap (CC) onto the short
tapered tube (E).
Place the tapered end of the short tapered tube (E)
into the untapered end of the bottom tube
assembly, as shown.
Hardware Used
Large End Cap
CC
7. NOTE: ASSEMBLY SHOWN FOR 96 IN. OPENING
HEIGHT. The following assembly should be modified
based on your opening height, SEE CHART ON
PAGE 4.
Insert the spring stoppers (FF) into the ends of the
spring, as shown. NOTE: Spring is packed inside
straight tube (B).
Place straight tube (B) on top of the assembly and
insert three spacers (AA) into the straight tube (B),
as shown.
Hardware Used
AA
Spacer
FF
Spring Stopper
IS2265
6
x 1
7
FF
x 3
x 2
7
bottom tube
assembly
tapered end
at the top
E
CC
AA
FF
spring
FF
B
tapered end
at the top