Assembly Or Installation Instructions - Style selections 2165WWMV Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
1. Measure the distance between the tub ledge or
the shower stall floor to the ceiling to the nearest
half inch.
NOTE: See the below chart to determine what
tubes (C), (D) and (E) are needed.
NOTE: No matter the distance, tubes (A) and (B)
are ALWAYS used.
Please write down your measurements, tubes and
spacers needed below, you will need this later.
Opening Height:
Tubes Needed: A + B +
Number of Spacers (AA) Needed:
DISTANCE
TO CEILING
60 - 61.5 in.
62 - 64 in.
64.5 - 67 in.
67.5 - 71 in.
71.5 - 73 in.
73.5 - 75 in.
75.5 - 78 in.
78.5 - 81 in.
81.5 - 84.5 in.
85 - 88.5 in.
89 - 91.5 in.
92 - 95 in.
95.5 - 97 in.
IS2265
USE TUBES (C), (D), AND (E)
AS NEEDED
(D)
(C)
(C)
(C) and (E)
(C) and (E)
(C) and (D)
(C) and (D)
(C) and (D)
(C) and (D)
(C), (D) and (E)
(C), (D) and (E)
(C), (D) and (E)
(C), (D) and (E)
4
1
tub ledge
(opening height)
shower stall floor
(opening height)
NUMBER OF
SPACERS (AA) USED
3
2
3
0
1
0
1
2
3
0
1
2
3