Hepa Filter Replacement - Uline H - 8651 Manual Del Usuario

QUICK CLEAN SPEED
A high-speed filtration setting can be used to rapidly
filter air when airborne particle levels are high. Press
"+" until the Quick Clean icon
will immediately be a dramatic increase in airflow that
will enable maximum air filtration. Due to increased
sound levels, use of this mode is recommended only
as conditions require. Low, medium and high speed
settings are designed for day-to-day use.
AUTOMATIC DUST SENSING MODE
This feature monitors the air quality of the room to detect
the presence of particles and then adjusts the fan
speed to improve air quality to optimum conditions.
Press the automatic dust sensing mode button to
engage this feature. The screen will display the
animated Automatic Dust Sensing icon
indicate when this feature is active. The dust sensor will
continuously monitor the amount of airborne particles
in the environment and adjust the fan speed between
low, medium and high as needed to maintain optimum
air quality. The quick clean speed is not utilized when
automatic dust sensing mode is enabled. Please note
that automatic dust sensing mode is overridden when
sleep mode is engaged to ensure the unit is providing a
consistent, low-noise level during nighttime sleep.
WHEN TO USE
This feature allows the unit to reduce energy usage
when fewer airborne contaminants are present in the
room. Because active people and pets tend to stir up
airborne particles, the unit will tend to increase speed
during peak periods of activity in the room until lower
readings are obtained. This feature is ideal for rooms
where activity fluctuates greatly based on time of day.
NOTE: Clean the dust sensor periodically.
See Maintenance on page 5.
SLEEP MODE SETTING
This feature senses no light or low light conditions and
automatically adjusts the unit to low speed. Press the
Sleep Mode button to engage this feature. The Sleep
Mode icon will display. Ideal for use in bedrooms.
Higher and more powerful speeds may be used
throughout the day with lower speeds and minimal
noise preferred at night.
NOTE: In low light or no light, with sleep mode
selected, unit will only operate at low speed.
This will override Automatic Dust Sensing mode
and high-speed settings. In regular light, unit
will operate at previous setting.
PAGE 3 OF 18
OPERATION CONTINUED
CARBON FILTER REPLACEMENT
Unit is equipped with a Carbon filter indicator light to show
when it is recommended to change the carbon filters.
displays. There Refer to Filter Replacement on page 4 for instructions. This
feature is controlled by time of use. The light will illuminate
after 4,000 hours of run time has accumulated. (See Figure 1)

HEPA FILTER REPLACEMENT

Unit is equipped with a HEPA filter indicator light to show
recommended time to change the HEPA filters. Refer to
Filter Replacement on page 4 for instructions. This feature
is controlled by time of use. The light will illuminate after
9,000 hours of run time has accumulated. (See Figure 1)
Figure 1
, to
For best results, position front of unit (side with logo)
towards center of room, leaving at least 6" from walls or
furniture on every side. (See Figure 2)
NOTE: User environments will differ. Filter
replacement time is based on average
use situations. Using air cleaner in a more
demanding environment may require
changing filter more frequently. In less polluted
environments, filter life may extend beyond the
notification.
6"
Figure 2
NOTE: For optimum airflow, air outlet should be
clear of obstructions. Ensure curtains and other
items are far enough away from unit to not be
pulled into side inlets or interfere with airflow.
6"
0721 IH-8651