Dynamic DYNACUBE Instrucciones De Uso Y De Mantenimiento página 14

NOTICE DYNACUBE_International 4/08/03 10:19 Page 14
③
INSTRUCTIONS
• Take unit, unfold all (3) legs. Two (2) types of mounting supports are inclu-
ded with the Dynacoupe, designed to adapt to all working environments.
First system consists of (3) supports,
which must be permanently installed
with all (6) screws, which are included
with the unit. Following each use of the
machine, in order to clean it. All that is
required are for the legs to be released
one at a time from the fixed supports by
folding them gently.
2 nd system consists of (3) suction cups
allowing for a temporary installation,
Working surface must be clean and
smooth for full effectivencess of the suc-
tion cups.
14