Dynamic DYNACUBE Instrucciones De Uso Y De Mantenimiento página 20

NOTICE DYNACUBE_International 4/08/03 10:19 Page 20
⑤
SECURITY
CAUTION - SHARP
Do not insert
hand in funnel
⑥
CLEANING
After each use, the crank must be in an upper position, remove the cutting
blade by pulling downward. Disengage all (3) latches, remove the upper and
lower grid.
Wash the top and bottom units, cutting grids, cutter blade and the stainless
steel chute with clear running water.
20