Elari NanoPods Sport Manual De Usuario página 4

2. Getting started: pairing the earphones
with each other
The earphones are two separate Bluetooth-devices which need
to be paired to each other before connecting them to your
smartphone, tablet, laptop, etc. This needs to be done once,
and after the initial connection, they will pair to each other and
connect to the Bluetooth device automatically when you power
them on. To simplify and enhance user experience we have al-
ready completed the initial pairing of your Elari NanoPods Sport.
Simply turn on the Elari NanoPods Sport by pressing and hold-
ing power keys of both earphones for a few seconds, until the
voice prompts "Power on", "Right channel" and "Left channel"
and only right earphone is blinking red and white, then go to
step "3. Connecting to a Bluetooth device". If for some reason
your earphones are not paired with each other, and the indica-
tor light on both earphones is blinking red and white, in this
case please use instructions below.
Left (L) Right (R)
6
To pair the earphones to each other please follow the instruc-
tion below:
2.1. Take the left (L) and the right (R) earphones in the off
state (indicators not blinking).
2.2. Press and hold power keys of both earphones until
you hear first "Power on" and then "NanoPods pairing"
voice messages. The indicators of both earphones will
start blinking red and white.
To accelerate the pairing process, bring the headphones
closer to each other.
2.3. Now the earphones will connect to each other. In the
earphones you will hear "NanoPods connected" voice mes-
sage and indicators will start blinking white only.
2.4. Then you will hear the voice messages: "Right chan-
nel" and "Left channel". Now the earphones are successfully
paired to each other and ready to be connected to your
Bluetooth device, and the right earphone will start blinking
red and white.
7