Elari NanoPods Sport Manual De Usuario página 6

5. Buttons functions
Button Function
• To turn the earphones on or off, press and
hold the button for a few seconds.
• To answer or end a call, short press the
button.
• To reject an incoming call, press and hold
the button until you hear a beep.
• Press twice the button to redial the last call.
• Short press the button to pause or play
music.
• With the earphones not paired to each other,
Power/Call button
and not connected to the phone, and are
in pairing mode, press the button twice to
switch between different languages of the
voice prompt.
• To call the voice assistant of the smartphone
OS (Siri for iOS / Ok, Google for Android), hold
the button for one second.
If only one of the earphones is turned on – all the functions of the Power/
Сall button described above are carried out directly on the earphone.
10
6. Earphones and case charging
Both earphones and the charging case are equipped with built-
in batteries. Before the first use, make sure that the headset is
charged.
Charging case: connect the charging cable to the case's
microUSB port. Plug the cable into standard USB 5 V power
output. When charging, the indicator will be flashing red. If the
charging didn't start, unplug the charging cable and then plug
it again. When the case is fully charged, the case's indicator will
turn red without flashing. You can now unplug the charging
cable from the microUSB port.
Earphones: earphones charging doesn't require a charging
cable. Just insert the earphones into the charging case and
press the in-case power button. When the earphone's indica-
tor turns red, the charging case's indicator will turn white, and
the earphones will start charging. If the charging didn't start,
take the earphones out of the case, and then put them back
again. When the earphones are fully charged, the red indicator
will turn off. The charging case will turn the power off automati-
cally.
Make sure that the silicon tip is attached correctly and is not
11