preventing the earphone from charging inside the case, and
that the charging contacts on the earphone and/or the case
are not dirty.
Attention
• Use only original Elari cable included in the set. Using non-
original USB/microUSB 5 V charging cables may result in dam-
aging the earphones, or, under extreme conditions, explosion,
and will void the product warranty.
• Multiple repeated charging and discharging of the earphones
will decrease the battery performance over time. This is normal
for any rechargeable battery.
• When the earphones battery level is low, the earphones will
repeat "Low battery" voice message, and the earphone's indica-
tor will start blinking red. If the earphones become discharged
during a call, the call will be automatically transferred back to
the phone.
7. Power off
Press and hold the Power/Call button on the earphone to turn
the earphones off.
12
8. Warnings and operational
recommendations
• When both earphones (R) and (L) are turned on, the main ear-
phone is considered to be the right earphone (R) (It is a feature
of True Wireless Stereo (TWS) technology). The location of the
signal source on the right side reduces the probability of its
interruption due to interference from obstructions and disper-
sion (for example, the location of the smartphone in the right
front pocket of the clothing allows you to reduce signal inter-
ruptions in comparison when signal source is located on the
left side).
• The right earphone, being the main one, accepts the Bluetooth
signal from the source and transmits it to the left earphone,
when working in stereo mode. Therefore, the battery discharge
rate on the right earphone is slightly higher than on the left
(the exact value depends on the audio listening volume, as well
as the presence of interference in signal transmission).
• Earphones and charging case has protection nanocoating,
which allows to maintain their performance even after im-
mersing to a depth of 1 meter for up to 30 minutes duration,
which corresponds to the protection class IP67.
13