Technical Specifications - Nupower EVOLUTION NPEGG780 Manual Del Usuario

TECHNICAL SPECIFICATIONS

MODEL
Type
Voltage Regulator
Max. AC Output
Rated AC Output
AC Voltage
Frequency
Phase
Power Factor
Degree of Protection
Performance Class
Sound pressure level (measured at 4 m.)*
Sound power level
Model
Type
Stroke
Displacement (cc)
Max. Output (HP/kW - RPM)
Fuel
Fuel/Oil mix ratio
Fuel tank Capacity (lt)
Rated Continuous Operation (hs)
Lubricating oil
Lubricating oil capacity (lt)
Starting System
Ignition system
Spark plug type
Lenght x Width x Height
Net Weight
• Specifications subject to change without prior notice.
• Generating set ISO 8528
* Measured according to EN ISO 3744 Standard.
The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission
between the emission and exposure levels this cannot be used reliably to determine whether or not further precautions are required.
Factors that influence the actual level of exposure of work-force include the characteristics of the work room, the other sources of noise
etc. i.e. the number of machines and other adjacent processes, and the length of time for which an operator is exposed to the noise. Also
the permissible exposure level can vary from country. This information, however, will enable the user of the machine to make a better
evaluation of the hazard and risk.
NPEGG780
Brushless, 2-poles, Single phase
Condenser Type
0,78 kW
0,65 kW
230V
50 Hz
Single phase
cos φ = 1,0
IP23
LP 67.6 dB (A)
LW 91 dB (A)
UP65
Air-cooled 2-stroke, Single Cylinder Gasoline Engine
45 × 40 mm
2 / 1.5 - 3000
Unleaded Gasoline
50:1 or 40:1 (Summer)
Oil for 2-stroke engine
Recoil Starter
C.D.I.
F5TC
365 × 310 × 315 mm
17.5 kg
25
G1
63
4.2
6
- - -
GB