System Lay-Out - Elvox EBR1 Manual Del Instalador

FRAGMA

SYSTEM LAY-OUT

280/11,2"x300/12"
1
2
3
2
3
2
3
1 - FRAGMA barrier
2 - Photoelectric cells
3 - Column for P.E. cells
Parts to install according to EN 12453 standard
COMMAND TYPE
Hold-to-run operation
Impulsive - in sight (e.g. push-
button)
impulsive - out of sight (e.g.
remote)
automatic
* a typical example are those doors which do not have access to any public way
A: Hold-to-run operation made by push-button
B: Hold-to-run operation made by key selector ex: code EDS1
C: Adjustable power of the motor or photocells to respect impact forces as indicated in Annex A
D: Safety strips and/or other additional devices to reduce the probability of contact with the door.
E: Devices installed in such a way that a person can not be touched by the door.
3000/118" - 4000/157" - 5000/197" - 6000/236"
5
4 - Strip with Photo electric cells
5 - Magnetic loop
USE OF THE SHUTTER
Skilled persons Skilled persons
(out of public area*) (public area)
A B
C or E C or E
C or E C and D, or E
C and D, or E C and D, or E
TECHNICAL FEATURES
4
Ambidextrous irreversible actuator, with built-in control board, used to
handle booms 3 - 4 m long (EBR1) and 5 - 6 m long (EBR2).
2
The cabinet of the operator is treated with cataphoresis and thermal spray
coating.
The barrier boom can be supplied as a single piece or, in the case high
objects may hinder its travel, you can require it in the articulated version,
3
specifying the height of this obstacle from the ground.
The barrier boom with VIMAR profile is constructed for being fitted with a
photocell strip.
N.B. You must make installation features comply with laws and standards
in force.
2
TECHNICAL DATA
3
Max. boom lenght
Opening time
Power supply
2
Motor capacity
3
Power absorbed
Capacitor
Max. torque
Power supply
Motor capacity
Power absorbed
Capacitor
Max. torque
Daily operations suggested
Service
Guaranteed consecutive
Not skilled
persons
cycles
Not possible Lubrification
Weight of electroreducer
C and D, or E
Working Temperature
C and D, or E
Protection IP
C and D, or E
ASSEMBLING FRAGMA
After you have cemented in the base plate (code. EBRB) where you want
it, mount barrier using the nuts provided and a no. 19 hexagonal wrench.
EN
Measurements
in mm/inch
EBR1 | EBR2
4/157" | 6/236"
m/in
s 3 | 6
230V~ 50Hz 220V~ 60Hz
240 285
W
A 1 1,3
10
µF
80/59 | 73/54 |
Nm/ftlb
155/114 141/104
120V~ 60Hz
186
W
2
A
µF 25
54/40 | 105/77
Nm/ftlb
1200 | 1500
n°
% 100
1200 | 1500
n°
SHELL OMALA S2 G100
kg 62
-10 ÷ +55
°C
54
IP
17