Installing Windows - ASROCK 970DE3/U3S3 Manual De Instrucciones

2.7 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.8 Installing Windows

XP 64-bit With RAID Functions
If you want to install Windows
on your SATA / SATA2 HDDs with RAID functions, please refer to the document at
the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.9 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.9.1 Installing Windows
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATA2 / SATA3 HDDs without NCQ and Hot Plug functions (IDE
mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE] for SATA2 ports.
Set the "Onboard SATA3 Operation Mode" option to [IDE] for SATA3 ports.
STEP 2: Install Windows
22
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit on your SATA / SATA2 / SATA3 HDDs
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock 970DE3/U3S3 Motherboard
TM TM
/ Vista 64-bit / XP /
TM
/ Vista 64-bit / XP / XP 64-bit
TM TM
/ Vista 64-bit / XP /
TM TM
/ Vista 64-bit / XP / XP 64-
Storage Confi guration.