Publicidad
GB
F
D
E
DRIVING SCREWS
To drive a screw, put the screwdriver bit in the screw
head and align the driver in the desired position
against the work surface.
Depress the trigger and once the motor is running,
push the tool forward to start screwing or unscrewing.
MAINTENANCE
After use, check the tool to make sure that it is in top
condition.
We recommended that you take this tool to an Authorised
Ryobi Service Centre for a thorough cleaning and
lubrication at least once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE
MOTOR IS RUNNING.
ALWAYS UNPLUG THE POWER CORD BEFORE
CHANGING REMOVABLE OR EXPENDABLE PARTS
(BLADE, BIT, SANDPAPER, ETC.), LUBRICATING OR
WORKING ON THE TOOL.
KEEP HANDLES CLEAN AND FREE FROM OIL AND
GREASE.
I
P
NL
S
DK
English
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
6
N
FIN
GR
H
CZ
WARNING!
For greater safety and reliability, all repairs
should be performed by an Authorised Ryobi
Service Centre.
RUS
RO
PL
Publicidad
