Cooktop Communication Module Setup; Wi-Fi Commissioning - Monogram ZHU36RSPSS Manual Del Propietário

USING YOUR COOKTOP
COOKTOP COMMUNICATION MODULE SETUP (If Applicable)
Look at the underside of the cooktop in the front/left corner
to see if there is an input connector jack.
If the connector jack looks like this then no further action is
required, proceed to Wi-Fi Commissioning.

Wi-Fi COMMISSIONING

Turning On the Wi-Fi
Download the SmartHQ App onto your mobile device and create an account. Use the + button on the SmartHQ App
homepage to add the cooktop, follow the steps in the SmartHQ App to connect Wi-Fi.
Press and hold the Precision Cooking button for 3 seconds until display reads "Add". Tap the
reads "Off". Tap the
SmartHQ App. To exit Commissioning and Pairing, press Precision Cooking button one time, or menu will automatically
exit after 60 seconds of no user input.
Turning Off the Wi-Fi
Hold the Precision Cooking pad for 3 seconds until display reads "Add" and Bluetooth symbol is blinking. Tap
until the display reads "On" and the and the
complete.
10
to turn Wi-Fi On. The
is blinking. Tap
If the connector jack looks like this then refer to the
instruction insert included in the literature packet titled
"Important Installation Instruction Cooktop Communication
Module" for setting up this device.
will start blinking. The
to turn Wi-Fi Off. The
twice until the display
will turn solid when complete steps in the
icon will turn off when
twice
49-2000868 Rev. 0