Care And Cleaning; Troubleshooting - Commercial Electric 53826101 Manual De Uso Y Cuidado

Care and Cleaning

CaUtion: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the
fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

troubleshooting

Before doing any work on the fixture, disconnect power to the light fixture.
warninG:
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the circuit breaker
trips when the light is turned on.
The light fixture flickers or makes a
buzzing sound.
Out of sync
Possible Cause
The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the power
wire is grounding out.
The dimmer circuit is not compatible
with the product.
The dimming circuit is set outside the
dimming range of the product.
Slide the dimmer too fast.
The dimmer circuit is not compatible
with the product.
9
Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call Commercial
Electric customer service 1-877-527-0313.
Check the product page at www.HomeDepot.com
for a list of compatible dimmers.
Turn or slide the dimmer switch to adjust the light
output until the flickering or buzzing stops.
Turn off the wall switch for more than 3 seconds,
then turn back on.
Check the product page at www.HomeDepot.com
for a list of compatible dimmers.
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM