Installation; General Considerations; Levelling Of The Appliance; Electrical Connection - Palazzetti ECOFIRE MELITA Manual De Instalación Y Mantenimiento

7

INSTALLATION

7.1

General considerations

In the following paragraphs some indications
are provided to be respected in order to obtain
the maximum performance from the purchased
product.
The following indications are how-
ever subject to compliance with any
possible national, regional and mu-
nicipal laws and regulations in force
in the country where the appliance is
installed.

7.2 Levelling of the appliance

The appliance must be levelled with the help of a
spirit level, by regulating the adjustable feet (Fig.
21).
A = Spirit level.
A
58

7.3 Electrical connection

Simply connect the appliance to the electrical
system using the supplied plug (Fig. 22).
The electrical connection (plug) must be easily
accessible after appliance installation as well.
If the power supply cable is damaged
it must be replaced by the technical
assistance service or a qualified techni-
cian in order to prevent any risk.
The system must be equipped with
an earth connection and a differential
switch in compliance with the laws in
force.
The flue gas evacuation duct must
be equipped with its own earth
connection.

7.4 Fuel optimisation

Excellent fuel depends on different factors (type
of installation, operating and maintenance con-
ditions, type of pellets, etc.)
Fig. 21
Upon first ignition, the stove can be regulated for
optimum combustion performance. Generally
speaking, if at the end of combustion, there is a
lot of residue in the burn pot, you should change
the combustion configuration (by increasing the
value) until you find the best solution.
Please refer to the submenu [14] "Combustion" of
the use and operation manual.
Fig. 22
004778850 - 31/08/2021