If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button.
2. Press the ENTER button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed. (see page 12)
Changing Channels
Using the Channel Buttons
1. Press the CH
or CH
When you press the CH
sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 16 to memorize channels.
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
1. Press the VOL
or VOL
Using Mute
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE button and the sound cuts off.
The word "
2. To turn mute off, press the MUTE button again, or simply press the
VOL
or VOL
buttons.
button to change channels.
or CH
button, the TV changes channels in
buttons to decrease or increase the volume.
" will appear in the lower-left corner of the screen.
English - 13
TV
Setup
Plug & Play
Language
: English
Time
Caption
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
▼More
Move
Enter
Plug & Play
Start Plug & Play.
OK
Enter
Return
►
►
►
►
►
►
►
Return