Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
Change to the PC mode first.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button.
Press the ▲ or ▼ buttons to select "PC", then press the ENTER button.
2. Press the ▲ or ▼ buttons to select "Auto Adjustment", then press the ENTER button.
The message "Auto Adjustment in Progress. Please wait" appears on the
screen and the picture adjustments are automatically activated.
Press the EXIT button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Change to the PC mode first.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button.
Press the ▲ or ▼ buttons to select "PC", then press the ENTER button.
2. Press the ENTER button to select "Image Lock".
3. Press the ▲ or ▼ buttons to select "Coarse" or "Fine", then press the ENTER button.
Press the ◄ or ► buttons to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
TV
English - 41
TV
Setup
▲More
PC
Home Theater PC : Off
Light Effect
: Off
Energy Saving
: Off
HDMI Black Level : Normal
AV Color System : Auto
PIP
Move
Enter
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move
Enter
Auto Adjustment in Progress.
Please Wait
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move
Enter
▲
Coarse
▼
Move
Adjust
Return
►
►
►
►
►
►
►
Return
►
►
►
►
Return
►
►
►
►
Return
0