Beta 1549 Instrucciones página 4

INSTRUCTIONS FOR USE
SPECIAL KIT FOR MOUNTING SHOCK ABSORBERS WITH
SPRING "STOP BUFFER
COMPONENTS
Beta item number
VN961
VN962
VN960
M8x60
96TBP
APPLICATION
Brand
BMW, Fiat, Ford, MB, Nissan, Peugeot, Toyota
The new "ROD-STOPPER " is suitable for holding the shock-absorber rod, when mounting & dismounting the coils.
In fact the new generation of shock-absorbers has an Hydraulic-Gas cylinder that is retracting automatically when is free from
the coil.
TECHNICAL DATA
Rod Range:
Material:
Thickness:
DISMOUNTING
- Completely remove the shock absorber
- Move the dust protector or the buffer
- Degrease the cylinder stem
- Mount and fix the clamp
MOUNTING
1. Position the clamp with the fixing screws.
2. Screw the stem puller in the support by positioning
the unit on the shock absorber and fix the stem of the
cylinder with the locking nut.
3. E xtract the stem puller and lock it with a light rotation
towards right or left.
4. I n case the buffers do not relent with normal muscular
force, it is possible to extract the stem by another 20
mm by keeping the support still and rotating the stem
puller.
5. W hen the extraction is complete, lock the clamp with
the appropriate screws.
6. The stem in extension determines the final position
obtained by correct use of the device.
4
Description
Support for stem puller
Stem puller
Stem locking universal clamp
TCCE 8x60 screws
Commercial 6 mm "L" key
Ø12 mm. MIN – Ø 28 mm. MAX
Aluminum (for not damaging the Rod). (Ref.
20 mm (Ref. )
VN960
)
VN960
1 2
4 5
EN
3
6