Replacing Components; Cleaning The Interior; Main Components - Gastro GW 35 Serie Instalación, Uso, Mantenimiento

17. REPLACING COMPONENTS

REMINDERS FOR REPLACING COMPONENTS
BEFORE DOING ANY MAINTENANCE,
COMPLETELY DRAIN OUT ALL WATER,
SHUT OFF THE POWER SUPPLY AND
CLOSE THE WATER SUPPLY COCK.
AFTER REPLACING AN ELECTRICAL
SYSTEM COMPONENT, CHECK IT IS
CORRECTLY WIRED.

18. CLEANING THE INTERIOR

Check the condition of the inside of the appliance.
Remove any built-up dirt.
Remove the washing impellers every 2-3 days and
make sure that there are no food deposits inside.
Check the slits and clean thoroughly if necessary.
Make sure that the rinse arm can rotate freely.
Remove any residues that may obstruct the holes of
the nozzles by gently using a thin point.
Any marks on the appliance interior may be removed
using a cloth dampened with water.
Any disincrustation of the dishwasher must be
carried out only by a specialised technician.

19. MAIN COMPONENTS

- Electric pump
- Impellers wash and rinse
- Boiler
- Bowl heating element
- Boiler heating element
- Electrical wiring
25