Connect To A Paired Bluetooth Device - Alcatel Onetouch Conquest Manual Del Usuario

1. From home, tap Apps
2. Tap Bluetooth.
The Bluetooth settings open.
Nearby devices appear in the "Available devices" list.
l
If a target device is not detected, tap > Refresh to search again.
l
3. Tap a device from the "Available devices" list, and follow the onscreen instructions to pair with
the device.
The Bluetooth device is paired to your phone.
Methods to accept a Bluetooth connection differ depending on the devices used.
l
Forgetting a Paired Device
1. From the Bluetooth settings menu, tap Settings
unpair.
2. Tap FORGET.
The device is unpaired from your phone. To make another connection with the device, you will
need to pair again.

Connect to a Paired Bluetooth Device

You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a
compatible Bluetooth headset or car kit. It's the same procedure to set up stereo audio and hands-
free devices.
1. From home, tap Apps
2. Tap Bluetooth.
The Bluetooth settings open.
Paired Bluetooth devices appear in the "Paired devices" list.
l
3. Tap a device from the "Paired devices" list.
Your phone connects to the paired device.
The pairing and connection status is displayed below the device's name in the Bluetooth devices
section. When the device is connected to your phone, the Bluetooth paired icon
the status bar. Depending on the type of device you have connected, you can then start using the
headset or car kit to listen to music or make and receive phone calls.
Connectivity
> Settings .
> Settings .
next to the paired device you wish to
is displayed in
137