Maintenance And Cleaning - TEFAL EXPRESS ANTI-CALC Manual Del Usuario

T
YPE OF FABRICS
Linen, cotton
Silk, Wool
Synthetics
(polyester, acetate, acrylic, polyamide)
• Do not press the steam control button under the iron handle.
• When the red "tank empty" indicator light turns on, there is no more steam
• Unplug the steam generator. Open the tank filler flap
Fill the water tank up without exceeding the MAX level
• Close the water tank filler cover.
• Plug in the steam generator. Press the "Restart" button
ironing. When the green indicator remains lit, the steam is ready.

Maintenance and cleaning

• Do not use detergent or descaling products for cleaning the soleplate base-unit.
• Never hold the iron or the base unit under the tap.
• Empty and rinse the removable water tank.
• Clean the plastic parts of the appliance occasionally with a soft cloth.
SETTING TEMPERATURE
CONTROL
- Start with the fabrics to be ironed at a low temperature (•) and finish with those which need
higher temperatures (••• or Max).
- Mixed fibre fabric: set the ironing temperature to the setting for the most delicate fabric.
- Woollen garments: press repeatedly on the steam control button
of steam, without placing the iron on the garment itself.
- Thick fabric: increase the steam setting.
- At a low temperature : set the steam output control dial to the low position.
• Set the iron temperature control slide and the steam output control dial (located on the control
panel) to the MAX position.
• Hang the garment on a coat hanger and hold the fabric slightly taut with one hand.
• Holding the iron in a vertical position
steam control button (underneath the iron handle) moving the iron from top to bottom
• Press the Turbo control 2 or 3 times when you need extra steam:
- for ironing thicker fabrics,
- for getting rid of creases,
- for powerful vertical steaming.
•••
SETTING STEAM OUTPUT CONTROL DIAL
••
•
, tilted slightly forwards, press repeatedly on the
. The water tank is empty.
.
.
, on the control panel to continue
to obtain short bursts
.