Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
INSTRUCTIONS FOR USE
1. Your unit should arrive with a full charge. When you need to
charge the unit, plug the adapter into the jack on the unit,
and plug the other end into a 120-volt outlet. The power p
button will illuminate red when charging and will change to
green once fully charged. The unit should be charged after 5
hours of charge time. A full charge will last up to 2 hours.
2. This massager is versatile and can be used for neck, shoulder,
back, legs, arms and feet (Fig. 1-3). For use on neck,
shoulders, or back, attach the adjustable straps to the ends
of the unit (Fig. 4), use the straps to hold the massager in the
desired area. The double-barrel design allows the massager to
roll up and down your body relaxing muscles and alleviating
pain as it rolls.
3. To activate the massage action, press and hold the power
button (Fig. 5) and the vibration waves will start on the lowest
setting. Press again for medium intensity and a third time to
experience the highest intensity. To turn the unit off, press
and hold.
4. When not in use, store your Cordless Double-Barrel Massager
in its convenient carrying case.
4