Power Saving Function; Plug And Play; Specifications; Use Of The Tilt-Swivel Base - Dell UltraScan 15TX Guia Del Usuario

Power Saving Function

This monitor meets the power-saving guidelines set by the
EPA Energy Star program as well as the more stringent
NUTEK 803299 (TCO92) guidelines. It is capable of reduced
power consumption when used with a computer equipped
with Display Power Management Signaling (DPMS). By
sensing the absence of the sync signal coming from the
computer, it will reduce the power consumption as follows:
State
1 Normal operation
Stand-by
2
(1st step of power saving)
Suspend
3
(2nd step of power saving)
Active-off
4
(3rd step of power saving)

Plug and Play

This monitor complies with the DDC™1 and DDC2B, which
are the Display Data Channel (DDC) standards of VESA.
When a DDC1 host system is connected, the monitor
synchronizes with the V.CLK in accordance with the VESA
standards and outputs the EDID (Extended Display

Specifications

Picture tube 0.25-mm aperture grille pitch, 15
inches measured diagonally (13.7"
visual), 90-degree deflection
Effective picture size Approx. 285 × 213 mm (w/h)
(11 1/4 × 8 1/2 inches)
Resolution Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Display picture size Approx. 270 × 202 mm (w/h)
(10 3/4 × 8 inches)

Use of the Tilt-Swivel Base

With the tilt-swivel base, this unit can be adjusted to be
viewed at your desired angle within 90° horizontally and
20° vertically.
To turn the unit vertically and horizontally, hold it at its
bottom with both hands.
6
Power consumption
100%
approx. 10%
approx. 10%
approx. 7%
CAUTION: The Power Saving function will automatically
put the monitor into Active-off state if the power
switch is turned on without any video signal
input. Once the horizontal and vertical syncs are
sensed, the monitor will automatically return to
its Normal operation state.
Required
u Power indicator
resumption time
—
approx. 3 sec.
approx. 3 sec.
approx. 10 sec.
Indentification) to the data line.
When a DDC2B host system is connected, the monitor
automatically switches to the DDC2B communication.
Deflection frequency Horizontal: 31.5 to 64 kHz
AC input voltage/current
Dimensions
Mass
Design and specifications are subject to change without
notice.
45°
POWER SAVING
indicator
green on
green on
orange on
green on orange on
orange on
off
Vertical: 50 to 120 Hz
100 to 120 V, 50/60 Hz, 1.8 A
220 to 240 V, 50 – 60 Hz, 1 A
368 × 373 × 384.5 mm
(14 1/2 × 14 3/4 × 15 1/4 inches)
Approx. 14 kg (30 lb 14 oz)
15°
45°
5°
off