Equipment Setup And Use; Prior To Use; Setup - Hillrom A-71318 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

INSTRUCTIONS FOR USE

3 Equipment Setup and Use:

3.1 Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

3.2 Setup:

1. Unscrew the jaw of the Articulating
Arm Support Clamp such that the
clamp mouth will fit over the rail.
3. Insert square horizontal rod into
adjustment clamp.
Document Number: D-720740
Version: C
2. Place the clamp in the desired
location on the table and tighten the
jaw onto the rail.
4. Set Arm Support the desired
distance from the table rails and
tighten knob on adjustment clamp.
Page 13
Issue Date: 16 MAR 2020
Ref Blank Template: 80025117 Ver. F

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

A-71319A-71320

Tabla de contenido