Wolf SRT486G Guía De Uso Y Cuidado página 10

Rangetop Operation
French Top
The French top is a graduated cooking surface with the
highest temperature under the center plate. Always use
cookware, do not cook food directly on the surface. For
higher cooking heat, place cookware closer to the center
and for lower heat, closer to the edges. Refer to the illus-
tration below.
To protect the surface from food splatters and moisture, it
is necessary to "season" the French top prior to use.
Season the French top:
The French top has a protective coating that must be
1
removed before use. Use hot water and mild detergent
to remove. Rinse and dry.
Turn on ventilation.
2
3 Push and turn the control knob counterclockwise to
Hi and heat for 30 minutes. After 30 minutes, turn the
knob to Off and allow the surface to cool.
4 While the surface is slightly warm, pour a small amount
of peanut or vegetable oil on a paper towel and spread
evenly. Once cool, wipe off any excess oil.
LOW LOW
HIGH
MED HIGH MED
HIGH
LOW LOW
French top heating zones
10 | Wolf Customer Care 800.222.7820
FRENCH TOP OPERATION
The stainless steel cover must be removed prior to
operation.
1 Turn on ventilation.
Push and turn the control knob counterclockwise to Hi.
2
The igniter clicks until the burner lights.
Allow the French top to preheat for 30 minutes.
3
CAUTION
Never leave pans on a high heat zone unattended.
Be careful when cooking food in fat or grease; it can
become hot enough to ignite.
CENTER PLATE
The French top burner is located below the center plate.
To remove, use the center plate hook (provided with the
rangetop) as shown in the illustration below. Never remove
the center plate while cooking.
CENTER PLATE
HOOK
Center plate removal