Velleman ROBOMECH Manual Del Usuario página 3

Mount the switch P25 onto board A.
Screw the battery holder (P24) to the back of the robot.
Fig.9
KNS3
Fig.5
Fig.7
- 3 -
Assemble the right arm
(G) and leg (E) and the
left arm (F) and leg (D)
and fix them to the
gearbox assembly.
Mount the head (boards
H – I – J – K – L – M),
insert the 2 LEDs (P21)
and fix the head to the
body with a P30 fixing
plate and P16 screws.
Fig.8
Connect the wires as in the diagram. Insert one
wire in the PVC tube (P26), twist the two wires
and cover the joint with the PVC tube.
Make sure all wiring is correctly connected!
1, 6, 8: black wire
2, 3, 7: red wire
4: green wire
5: yellow wire
Fig.6
VELLEMAN