Velleman KNS1 TYRANNOMECH Manual De Instrucciones

1. Introduction & Characteristics
Dispose of this product in accordance with local and national disposal regulations.
Thank you for buying the KNS1! Read this manual carefully before bringing the KNS1 into use.
• Easy to build, no glue or soldering required.
• Dislodge pre-cut pieces when you need them ; not before! Sand any jagged edges before use (sandpaper included)
• The kit is powered by 2 AA-batteries (not included).
The kits of the KNS-series are supplied with prepunched boards, a gearbox, gears, shafts, a switch, a motor, a
battery holder and all necessary parts.
2. Parts List
Part n° Quant.
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
2
11
2
12
4
13
6
14
1
15
1
KNS1
KNS1 – TYRANNOMECH
Description
gearbox
motor 3Vdc
pinion gear 8T
gear 40T/0T (white)
gear 40T/10T (red)
gear 40T/10T (green)
face gear 36T/10T (white)
metal shaft (3 x 52mm)
metal shaft (2 x 40mm)
nylon post (small)
nylon pad
nylon post (large)
nylon pad (Ø8mm)
wire with terminal (yellow)
wire with terminal (green)
Part n° Quant.
16
1
17
1
18
2
19
2
20
28
21
4
22
2
23
6
24
2
25
3
26
2
27
6
28
2
29
2
- 1 -
Description
battery holder
slide switch with wire
wire (7cm)
nut M2
self-tapping screw (2 x 4mm)
self-tapping screw
screw
washer
spring
PVC tube (15mm)
metal foot (U-shaped)
fixing plate (large)
fixing plate (small)
nylon connector
Fig.1
VELLEMAN